MEET JUICE 3-Piece Tilt-Head Mixer Set with Scraper Beater

What the maker puts in writing

• “Complete 3-Pack Set – Includes 1 x K45WW wire whip, 1 x K45DH dough hook, and 1 x K45B flat beater with scraper. Made from durable stainless steel, aluminum, and anti-stick nylon coating. Not OEM, but equal or better in quality.”
• “Versatile Performance – Whip cream and egg whites fast with the K45WW; knead dough effortlessly with the K45DH; and mash potatoes or mix batters evenly with the K45B flat beater.”
• “Perfect Compatibility – Designed for KitchenAid Tilt-Head stand mixers. Compatible with models like K45SS, KSM75, KSM95, KSM100, KSM150PS, and more (check image for full list).”
• “OEM Replacement Parts – Replaces part numbers like WP9704329, 9708471, W10674618, W10613277, etc.”
• “Everyday Kitchen Essential – Easy to install, clean, and use”
• Title: “K45B Coated Flat Blade Paddle with Scraper” · Reference MJ-KA-SET-3PCS

The scraper, which is the whole difference from the set below it

“1 x K45B flat beater with scraper.”

A rigid paddle leaves a film of unmixed butter, flour or batter against the side of the bowl, because the beater runs a fixed distance from the wall and that distance is not zero. So you stop the mixer, take a spatula, scrape the sides down, and start again — two or three times in a creaming step.

A scraper is a flexible edge on one or both sides of the paddle, running against the wall as the beater orbits, which keeps the mix moving inward.

And that is the only difference between this set and the OMOVAN at $19.99, which publishes:

the same three designations — K45WW, K45DH, K45B the same four part numbers replaced — WP9704329, 9708471, W10674618, W10613277 the same compatibility list — K45SS, KSM75, KSM95, KSM100, KSM150PS

with a plain K45B flat beater and no scraper. Two dollars.

The claim is not made on this page, but the New Metro Design listing on this shelf makes it about its own separate product, and it is the only quantified claim anywhere here: a scraping blade “eliminates hand-scraping the mixing bowl and cuts mixing time by as much as 50%”.

Treat that figure as a maker’s claim about a different item. The mechanism it describes is real, and it is the one improvement a flat beater can have.

Not OEM, said plainly

“Not OEM, but equal or better in quality.”

The most honest sentence on this shelf, and the only statement of its kind here.

The three KitchenAid items all say the opposite: “Genuine KitchenAid Stand Mixer Attachment - Designed and engineered by the manufacturers of the KitchenAid Stand Mixer.” The OMOVAN says neither, while listing the part numbers it replaces — which amounts to the same position without the admission.

What a non-original bowl tool risks, and what it does not.

It does not risk the mixer. A beater is a passive tool on a planetary shaft: a poor one mixes badly rather than damaging anything. This is the opposite of the hub attachments on this shelf, which take drive from the motor.

What it does risk is fit and finish. A shaft collar a fraction loose will rattle. A coating applied thinly will chip at the edges within a year, and a chipped coating on aluminum is the reason to replace a set rather than scrub it. And a wire whip of thinner gauge will bend in a stiff mixture.

Which is why the material statement here is worth as much as the OEM statement. “Durable stainless steel, aluminum, and anti-stick nylon coating” tells you the construction: a bare stainless whip, and a coated aluminum beater and hook — the same arrangement as the original.

And that division is the right one. A whip has to be stiff and thin and goes into acidic and salty mixtures, so bare stainless is correct. A beater and a hook are better coated, because a coating stops dough sticking and keeps aluminum out of contact with food.

The OMOVAN says only “coated”, and neither set publishes a weight — which is the figure that would say how much metal is under the coating. Every KitchenAid item on this shelf publishes one: New Metro 7.5 oz · KSMVSA 1.3 lb · KSMMGA 2.5 lb · KSMICM 6 lb · KSMPRA 7.5 lb.

Tilt-head, and the exclusion it does not write down

“Designed for KitchenAid Tilt-Head stand mixers. Compatible with models like K45SS, KSM75, KSM95, KSM100, KSM150PS, and more (check image for full list).”

Two gaps.

The full list is in an image, so it is not searchable, not quotable and not readable by anything that is not looking at the picture.

And there is no statement that it will not fit a bowl-lift mixer — where the OMOVAN says exactly that: “Not compatible with bowl-lift models. Please check your mixer model before ordering.”

The distinction is physical. A tilt-head mixer has a head that hinges back so you lift the bowl out from underneath. A bowl-lift has a fixed head and a bowl that cranks up into it on arms, with a different shaft, bowl diameter and depth.

The K45 prefix on all three designations is itself the tilt-head marker, so the parts are right. The page simply does not spell out the consequence — and the OMOVAN also puts the capacity in its title, “4.5-5 Qt”, which this does not.

The rest of the shelf, for contrast, and the reason it divides as it does:

KSMVSA slicer, $69.95 — “any KitchenAid Stand Mixer” KSMMGA grinder, $79.88 — “any household… power hub” KSMPRA pasta roller, $204.90 — “Fits all Household KitchenAid Stand Mixers” KSMICM ice cream maker, $96.56 — seven named exclusions, and “verify your model number compatibility” twice New Metro pouring chute, $24.94 — four brands, four exclusions

A hub attachment bolts to the front power take-off, which is standardized across the whole KitchenAid range — hence “any” and “all”. A bowl tool, a bowl replacement or anything resting on the bowl depends on dimensions that are not. Which is why the cheapest and most expensive items here carry exclusions and the three in the middle fit everything.

Three tools, three actions, and the fragile one

“Whip cream and egg whites fast with the K45WW; knead dough effortlessly with the K45DH; and mash potatoes or mix batters evenly with the K45B.”

The wire whip has many thin wires and is for folding air in: cream, egg whites, meringue, mousse. Put it in a stiff dough and you will bend it — which is the usual way a whip dies, and the reason a replacement set exists at all.

The dough hook is a single spiral and is for developing gluten: it folds and stretches rather than cutting, which is what bread needs. It is useless for anything light.

The flat beater is the general tool and does most of the work in most kitchens — and mashed potatoes, named in both of these listings, is the job where a scraper earns its keep most obviously, because mash clings to the bowl wall more than anything else.

One caution neither set gives. A flat beater is the wrong tool for a stiff bread dough, and a dough hook is the wrong tool for a light cake batter. Using the beater on dough is what strips a coating and loads the gearbox; it is the commonest misuse of a stand mixer and neither of these pages mentions it.

What is not published

No bowl-lift exclusion, as above — the one thing the cheaper twin does better.

No capacity. The OMOVAN gives “4.5-5 Qt” in its title and in its reference, OM-KA-SS3-5QT. This reference, MJ-KA-SET-3PCS, gives the piece count instead.

No weight, as above.

No dishwasher statement. “Easy to install, clean, and use” is the whole of it, and the shelf is unusually varied here: the KSMVSA publishes “All blades are dishwasher safe on the top rack”; the New Metro chute “dishwasher safe”; the KSMICM “Once the bowl has reached room temperature, simply clean with warm, soapy water”; and the KSMPRA pasta roller — the most expensive item on the shelf — “Hand Wipe only”. So the answer is not obvious by category, and a nylon-coated aluminum beater in a dishwasher is exactly the case where a detergent cycle shortens the coating’s life.

No scraper material or replaceability, on the feature that justifies the price. A flexible wiper is a wear part by definition: it runs against the bowl wall every revolution. Nothing says what it is made of or whether it can be renewed.

No written compatibility list, as above.

Availability

Read on the day this page was built: $21.99 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.