Skip to content

ersatzteilshop basics Fissler-Fit Sealing Ring 573-3866700205

A generic silicone replacement sealing ring for Fissler stovetop pressure cookers of the Blue Point, Magic, Vitavit Royal and Vitaquick ranges up to 2009 — not for electric multi-cookers. The maker publishes a replacement interval of every two to three years and warns that the size given is not the rubber ring’s own diameter — but its title and its specification give two different pot sizes.

Silicone replacement sealing ring for Fissler pressure cookers

Best for: A Fissler from before 2010, once you have measured the pot yourself.

Search Amazon for this model

Not listed on amazon.com. We check six Amazon marketplaces for every product and keep the references we find; we hold none here, so this button runs a search instead.

Specifications

Fits
Fissler stovetop pressure cookers to 2009: Blue Point, Magic, Vitavit Royal, Vitaquick
Does not fit
Electric multi-cookers — their rings are specific to each maker
Pot size
8.7 in (22 cm) in the title, 10.2 in (26 cm) in the text — check yours
Material
Heat-resistant silicone
Replacement interval
Every two to three years, stated
On Amazon.com
Not listed
Amazon reference
B08YYZSZR7 (identical on 5 markets)
EAN
4260583630889

The plus side, and the minus

Strengths

  • Around a third of the price of the original Fissler ring on the European Amazon stores
  • Heat-resistant silicone, stated for long service
  • The maker publishes the replacement interval: every two to three years
  • It warns explicitly that the listed size is not the ring’s own diameter

Compromises

  • The title says 8.7 in (22 cm) internal diameter and the specification says 10.2 in (26 cm)
  • A wrong seal on a pressure vessel is not a cosmetic mistake
  • Stated for Fissler models up to 2009 only
  • Not sold on Amazon.com: the button runs a search instead

Check the number twice

This listing publishes two different pot sizes: 22 cm (8.7 in) internal diameter in its title, 26 cm (10.2 in) in its specification text.

On most products that would be a typing error worth a footnote. On the sealing ring of a pressure vessel it is the specification, and there is no manual here to arbitrate.

What to do instead

Two checks, neither of which takes long:

  1. Measure the internal diameter of your own pot — the seller states plainly that the size in the listing is not the rubber ring’s own diameter, which is the source of most wrong orders in this category;
  2. read the number molded inside the ring currently fitted. Fissler prints its article number there, and it is the only reference that cannot be misread.

What it is

Heat-resistant silicone, stated for long service, for Fissler pressure cookers of the Blue Point, Magic, Vitavit Royal and Vitaquick ranges up to 2009.

The interval

The seller publishes it: every two to three years. Fissler publishes the same figure for its own ring. That is the useful thing to take from this whole hub — a cooker that will not hold pressure is usually a part, not a fault.

Original or not

We state the distinction and leave the choice. Pressure equipment is one of the few places on this site where “cheaper equivalent” deserves a second thought, and where the manufacturer’s own part has an argument beyond the badge.

Buying it in the United States

This ring is sold on the European Amazon stores and not on Amazon.com, so the button on this page runs a search instead. For a Fissler vitaquick or vitavit cooker, the original Fissler sealing ring, 8.7 in (22 cm), is listed on Amazon.com. Neither ring fits an electric multi-cooker: an Instant Pot, a Cosori or a Midea takes its own maker’s ring.

What readers want to know

Is it 8.7 in (22 cm) or 10.2 in (26 cm)?

The listing says both — 22 cm (8.7 in) in the title, 26 cm (10.2 in) in the specification text. We do not choose between a seller’s own figures on a pressure part. Measure the internal diameter of your own pot, and read the number molded inside the ring currently fitted: Fissler prints its article number there, and that is the only reliable reference.

How often should a sealing ring be replaced?

This seller publishes every two to three years, and Fissler publishes the same interval for its original ring. It is a wear part on every pressure cooker, and a cooker that no longer comes up to pressure is far more often a tired ring than a fault.

All seals & valves

Prices quoted in these summaries are dated readings. The live price is shown next to each product.